Downloads en
Please find here product descriptions, technical specifications and general information about our products.
Data sheets
Silixan A
SiliXan S 521 - additive & concentrate for hydrobobisation
| TDS | MSDS |
 |
 |
Solid [%] 30%
Solvent: Ethanol
Viscosity [mPas] 11 - 150
Application:
1. Additive for solvent-based coatings to increase hydrophobicity or to obtain an easy-to-clean or anti-limescale effect.
2. Concentrate for making glass or other mineral surfaces hydrophobic. The coating shows a slip and an anti-graffiti effect and water rolls off in drops.Anorganisch-organisches Siliciumpolymer
SiliXan Lab 1089 - UV non-stick additive, linerless labels
| TDS | MSDS |
| |
|
Solid [%] 100%
Solvent: solvent-free
Viskosity [mPas] 500 - 700
Application:
Non-stick, slip and easy-to-clean additive for UV coatings. Linerless labels.
SiliXan Lab 1089 M2 - UV slip additive
| TDB | SDB |
 |
|
Solid [%] 100%
Solvent: solvent-free
Viskosity [mPas] 200 - 400
Application:
Non-stick, slip and easy-to-clean additive for UV coatings.
SiliXan A 250
| TDS | MSDS |
| |
|
Solid content [%] 80%
Solvent: Acrylate
Properties:
Fluorine containing polymer on SiO2/ZrO2 base with methacrylic groups; Hydrophobic additive for UV lacquers
SiliXan A 260-30/W
| TDS | MSDS |
| |
|
Solid content [%] 30%
Solvent: Water
Properties / application:
Fluor polymer with hydro- and oleophobic properties for the formulation of aqueous impregnations and coatings with a low free surface energy (easy-to-clan, non-stick), e.g. for water-based coatings on wood or on mineral substrates like concrete, stone, brick or plaster.
Silixan Cat
SiliXan Cat 100
| TDS | MSDS |
| |
|
Active agent content [%] / solvent: 10% in 2-Butanol
RT drying: yes
Forced drying: >40°C
Properties:
Starter for SiliXan U, W and T.
For water and solvent based systems, suited as well for sol-gel and silicone resin systems
SiliXan Cat 120 PNB
| TDS | MSDS |
| |
|
Active agent content [%] / solvent: 10% in propylene glycol-n-butylat
RT drying: yes
Forced drying: >40°C
Properties:
Starter for SiliXan U and for use as an additive in isocyanate systems (2K-PU).
SiliXan Cat 161
| TDS | MSDS |
| |
|
Active agent content [%] / solvent: without solvent
RT drying: yes
Forced drying:>40°C
Properties:
Starter for SiliXan U and for use as an additive in isocyanate systems (2K-PU), low yellowing.
SiliXan Cat 181
| TDS | MSDS |
| |
|
Active agent content [%] / solvent: without solvent
RT drying: yes
Forced drying:>40°C
Properties:
Starter for SiliXan U and for use as an additive in isocyanate systems (2K-PU), low yellowing.
SiliXan Cat 210
| TDS | MSDS |
| |
|
Active agent content [%] / solvent: 50% in Butanol
RT drying: ++
Forced drying:>40°C
Properties:
Starter for SiliXan U and T, good room temperature drying
Silixan M
SiliXan M 685
| TDB | MSDS |
| |
|
Viscosity [mPas] 3000
Properties / application
Ungesättigtes siliciumfunktionelles Bindemittel zur Formulierung harter, kratzfester Beschichtungen mit guter Haftung auf PC, PMMA und PVC. Cobinder zur Verbesserung der Haftung, Härte und Abriebfestigkeit in UV- härtenden Formulierungen.
Unsaturated silicium functional binder for the formulation of hard, scratch resistant coatings with good adhesion to PC, PMMA and PVC. Cobinder to improve adhesion, hardness and abrasion resistance in UV-curing formulations.
SiliXan M 150
| TDS | MSDS |
| |
|
Viscosity [mPas] 540 - 940
Properties / application
Formulation of UV lacquers for mineral surfaces (natural stone or concrete) or use as co-binder for plastic coating
SiliXan M 600
| TDS | MSDS |
| |
|
Viscosity [mPas] 1490 - 1790
Properties / application
Silicon functional acrylate for the formulation of UV scratch resistant coatings on plastic (PMMA, PET, PC) and metals, preferred for indoor use. Additive for peroxide cross-linking systems and for UV curing coatings in exterior.
SiliXan M 610
| TDS | MSDS |
| |
|
Viscosity [mPas] 980 -1270
Properties / application
Silicon functional polyurethane acrylate for the formulation of UV scratch resistant coatings on plastic (PMMA, PET, PC) and metals, for indoor and outdoor use. Suited for dual cure application.
Silixan S
SiliXan S 100 - rust remover
Application:
Highly effective slightly acidic rust remover concentrate for the production of immersion baths or for the manufacture of rust remover sprays or aerosols
Solid content, solvent: 40% in water
SiliXan S 201- 50/ X - active corrosion protection, silver
Application:
Active agent concentrate for the production of active corrosion protection coatings as spray, dip or aerosol application; based on metallic zinc in inorganic binder matrix; colour: silver
Solid content, solvent: 50% in xylene
SiliXan S 290 - active corrosion protection, black
Application:
Active anti-corrosion coating for spray or dip application; Based on metallic zinc in an inorganic binder matrix; Colour: black
Solid content, solvent: 50% in xylene
SiliXan S 400- 35/ PE - scale protection coating
Application:
Active agent concentrate for the production of scale protection coatings; temperature stable up to 950°C; spray, dip or aerosol application; based on metallic aluminium in inorganic binder matrix; colour: silver
Solid content, solvent: 35% in Petrolether 100/140
SiliXan S 500 - fluorinated impregnation
Application:
Concentrate of an easy-to-clean polish for glass or cermaic; fluorinated silicium compound
Solid content, solvent: 2,5% in Isopropanol
SiliXan S 550 - fluorfree impregnation
Application:
Ready-to-use formulation for hydrophobisation of glass or mineral surface. Application by polishing, spraying, or dipping. Fluorine-free product.
Solid content, solvent: 1% in Ethanol
SiliXan S 521 - additive & concentrate for hydrophobisation
| TDS | MSDS |
| |
|
Solid [%] 30%
Solvent: Ethanol
Viscosity [mPas] 11 - 150
Application:
1. Additive for solvent-based coatings to increase hydrophobicity or to obtain an easy-to-clean or anti-limescale effect.
2. Concentrate for making glass or other mineral surfaces hydrophobic. The coating shows a slip and an anti-graffiti effect and water rolls off in drops.Anorganisch-organisches Siliciumpolymer
SiliXan S 570-10/W - fluoropolymer
Application:
Impregnations and coatings for wood and mineral substrates such as concrete, stone, brick or plaster.
Solid content, solvent: 10% in water
SiliXan S 590 K - hydrophobic treatment for concrete and mineral
Application:
Water based active agent concentrate for the production of active corrosion protection coatings as spray, dip or aerosol application; based on metallic zinc in inorganic binder matrix; colour: silver
Premium product
Solid content, solvent: 10% in water
Silixan T
SiliXan T 100- 40/PNB
| TDS | MSDS |
| |
|
Solid content [%] 40%
Solvent: Propylene glycol-n-butyl ether
Viscosity [mPas] 20-30
Application:
Temperature-curing silicium-functional binder for formulation of anti-fingerprint coatings on stainless steel or aluminium. Drying temperature 240°C PMT (coil)
SiliXan T 220- 25/E
| TDS | MSDS |
| |
|
Solid content [%] 25%
Solvent: Ethanol
Viscosity [mPas] 5 - 7
Key features and application:
Glass-like, temperature-stable coatings (up to 800°C). No yellowing at high temperatures. Co-binder for solvent-based baking coatings to improve the abrasion, temperature and corrosion resistance. "Easy-to-clean" properties.
SiliXan T 240- 15/IPA
| TDS | MSDS |
| |
|
Solid content [%] 15%
Solvent: Isopropanol
Viscosity [mPas] 9 - 11
Key features and application:
Glass-like coatings with high abrasion resistance and good corrosion protection on aluminium or stainless steel. It can also be used as a binder and as an additive for solvent-based varnishes or paints.
"Easy-to-Clean" properties due to low surface energy.
SiliXan T 910- 10/W
| TDS | MSDS |
| |
|
Solid content [%] 10%
Solvent: Water, pH 2-3
Viscosity [mPas] 6 - 9
Key features and application:
SiO2 polymer for the formulation of glass-like, hydrophilic coatings on polymers, metals (stainless steel, aluminium) or on glass and ceramic surfaces.
SiliXan T 320-20/W/E
| TDS | MSDS |
| |
|
Solid content [%] 20%
Solvent: water and ethanol, pH 12
Viscosity [mPas] 8-12
Key features and application:
Tarnish protection coating for stainless steel and copper, water-born.
SiliXan T 330-40/IPA
| TDS | MSDS |
| |
|
Solid content [%] 40%
Solvent: Isopropanol
Viscosity [mPas] 10-14
Key features and application:
Tarnish protection coating for stainless steel and copper, solvent-born.
SiliXan T 1300
| TDS | MSDS |
| |
|
Solid content [%] pH 30%
Solvent: water, pH12
Viscosity [mPas] 19-29
Key features and application:
Glass-like and temperature-stable (up to 800°C) clear coat with anti-tarnish effect for stainless steel and steel. Temperature-drying (≥180°C) anticorrosive coatings as well as adhesion primers for steel. Room temperature drying concrete coatings. The binder is suitable for applications on steel, stainless steel, aluminum, glass, concrete or ceramics.
SiliXan T 402
| TDS | MSDS |
| |
|
Solvent: solvent-free
Viscosity [mPas] 20 - 30
Key features and application:
Low-yellowing coatings for aluminium, stainless steel and glass. High temperature applications, UV stable.
Humidity drying at 20°C. Forced drying 60 to 250°C.
Application in the automotive sector (body, rims, engine), in industrial and mechanical engineering as well as exterior application (e.g. facades).
SiliXan T 600
| TDS | MSDS |
| |
|
Solvent: lösemittelfrei
Viscosity [mPas] 23-27
Key features and application:
Air-drying weathering and UV-stable, fade-proof varnishes and paints for construction, industrial or commercial applications. The product is characterised by good chemical resistance and high temperature stability. Good adhesion to glass, aluminium, stainless steel and mineral surfaces (concrete, plaster, natural stone). Forced thermal drying possible.
SiliXan T 660
| TDS | MSDS |
| |
|
Solvent: solvent-free
Viscosity [mPas] 23 - 27
Key features and application:
Properties like T 600, improved flash point.
SiliXan T 800- 15/BG
| TDS | MSDS |
| |
|
Solid content [%] 15%
Solvent: Butyl glycol
Viscosity [mPas] 23-27
Key features and application:
Formulation of temperature resistant coatings. Co-binder and reaction accelerator in sol-gel and silicone resin systems. Adhesion promoter in coatings for glass, metal or plastic. Inorganic UV absorber in impregnations or coatings. Formulation of optical coatings with increased refractive index. UV protective primer for wood. Mother of pearl effect coating.
SiliXan T 810- 15/DPM
| TDS | MSDS |
| |
|
Solid content [%] 15%
Solvent: Dipropylene glycol monomethyl ether
Viscosity [mPas] 23 - 27
Key features and application:
UV-protective primer for wood. Additive for solvent or water systems to improve the UV protection and chemical resistance.
SiliXan T 830
| TDS | MSDS |
| |
|
Solid content [%] 55 - 59%
Solvent: solvent-free
Viscosity [mPas] 18 - 24
Key features and application:
Inorganic-organic binder based on zirconium oxide that cures with moisture and forms temperature-stable coatings for high-temperature applications up to 600°C, e.g. stoves.
SiliXan T 851- 15/W
| TDS | MSDS |
| |
|
Solid content [%] 12 - 14%
Solvent: Water (pH1)
Viscosity [mPas] 150 - 250
Key features and application:
1. Concentrate for the production of mother-of-pearl effect coatings for glass with good abrasion resistance and hardness. Based on silicon and titanium oxide.
2. Transparent photocatalytic coating for glass, metal, mineral and painted surfaces. The <1µm thin coating protects against dirt, especially in rainy outdoor areas.
Transparent photo-catalytic coatings for glass, metals and mineral surfaces. Titanium oxide polymer, water-born.
Silixan U
SiliXan U 310 E - 50/PM
| TDS | MSDS |
| |
|
Solid content [%] 50%
Solvent: 1-Methoxy-2-propanol
Viscosity [mPas] 61 - 71
Properties / application:
High-quality UV-stable clear coats or pigmented coatings. The product shows good adhesion to metals such as aluminium or stainless steel. An adhesion primer is required for use on plastics made of PC, PC-ABS or PMMA.
SiliXan U 311 E - 50/PM
| TDS | MSDS |
| |
|
Solid content [%] 60 - 65%
Solvent: 1-Methoxy-2-propanol
Viscosity [mPas] 200 - 400
Properties / application:
Formulation of high-quality UV-stable clear coats or pigmented coatings. The product shows good adhesion to metals such as aluminium or stainless steel. The silane content (SiOx) is lower than in SiliXan U 310-50/PM, which means that the coating is less brittle and more flexible, e.g. for application on wood.
SiliXan U 330 E - 50/BA
| TDS | MSDS |
| |
|
Solid content [%] 60 - 65%
Solvent: 1-Methoxy-2-propanol
Viscosity [mPas] 170 - 370
Properties / application:
Formulation of high-quality clear lacquers and coatings for plastics made of PVC, PC, PC-ABS or PMMA. The product also shows good adhesion to metals such as aluminium or stainless steel.
SiliXan Lab 1139
| TDS | MSDS |
| |
|
Properties / application:
OH groups containing silane polymer (EQV-OH= 350) as a co-binder for 2K PU or 2K polyurea coatings to increase scratch and abrasion resistance. Application in clear coats on plastics (PC, PC-ABS, PMMA). Furthermore, the adhesion to glass and metals such as aluminium, steel or stainless steel is improved, too.
Solid content, solvent: 100%, solvent free
Viscosity [mPas] 17 - 25
SiliXan Lab 1139 M4
| TDS | MSDS |
| |
|
Properties / application:
OH groups containing silane polymer (EQV-OH= 350) as a co-binder for 2K PU or 2K polyurea coatings to increase scratch and abrasion resistance. Application in clear coats on plastics (PC, PC-ABS, PMMA). Furthermore, the adhesion to glass and metals such as aluminium, steel or stainless steel is also improved. Higher OH content than SiliXan Lab 1139.
Solid content, solvent: 100%, solvent free
Viscosity [mPas] 80 - 120
SiliXan U 100
| TDS | MSDS |
| |
|
Solid content, solvent: 100%, solvent free
Viscosity [mPas] 280 - 370
Properties / application:
Hard and steel wool abrasion-resistant clear coats for aluminium, wood or base coats - layer thickness 5 to 20 µm. Additive for sol-gel or silicone resin systems. Room temperature drying or 60-180°C drying. Methoxy functional silane groups.
Silixan W
SiliXan W 620
| TDS | MSDS |
| |
|
Solid content [%] 40%
pH 3.5-4.0
Viscosity [mPas] 19 - 24
Epoxy content [mol/kg] 0.9
Application
Good adhering primers and corrosion protection coatings for metals (especially steel). Hard and abrasion resistant clear coats for stainless steel or aluminium. Improvement of blocking resistance. Good adhesion to glass. Binder or additive for acidic or alkaline set (top coat) formulations: improvement of the corrosion and abrasion resistance of aqueous acrylate, epoxy or polyurethane dispersions as well as of sol-gel systems.
SiliXan W 625
| TDS | MSDS |
| |
|
Solid content [%] 38%
pH 3 - 4
Viscosity [mPas] 23 - 27
Epoxy content [mol/kg] 0.6
Application
Improvement of abrasion resistance as well as corrosion, water and chemical resistance of PU, acrylate or epoxy dispersions. Suited for purely physically drying coatings but also for isocyanate or melamine curing coatings.
For metal coatings (aluminium, zinc or stainless steel) as well as for plastic coatings (PC, PC-ABS, PMMA).
SiliXan W 600
| TDS | MSDS |
| |
|
Solid content [%] 50%
pH 4- 5
Viscosity [mPas] 23 - 39
Epoxy content [mol/kg] 1.8
Application
Good adhering primers and coatings for glass and metals. Cobinder for acidic formulations (sol-gel, acrylate, epoxy- or PU systems/dispersions). Higher content of aliphatic epoxide.
SiliXan W 220
| TDS | MSDS |
| |
|
Solid content [%] 40%
pH 4.0 - 4.5
Viscosity [mPas] 12 - 18
Epoxy content [mol/kg] 0.9
Application
Stoving coatings on glass and metals (steel, aluminum). Combination with aqueous acidic acrylate, epoxy or polyurethane dispersions possible.
SiliXan W 352
| TDS | MSDS |
| |
|
Material base: inorganic-organic polymer with functional silicium groups
Solid content [%] 33%
pH 4 - 5
Viscosity [mPas] 11 - 22
Application
1. Co-binder for melamine or isocyanate curing waterborn coatings in order
to improve adhesion on glass and metals (aluminium, steel, stainless steel,
zinc) and in order to to increase the scratch and abrasion resistance.
2. Formulation of clear coats with 5 to 20 μm dry film thickness.
Application on primed or base coated plastics or on aluminum and stainless
steel. Suited as an additional scratch-resistant clear coat on 2K PU clear
coats or on baked enamel coating.
SiliXan W 553-15/AB
| TDS | MSDS |
| |
|
Solid content [%] 15%
pH 7.5 - 8.5
Viscosity [mPas] 8 - 10
Application
Hydrophilic inorganic-organic composite for anti-fog coating on glass and hydrophilic coating on metals. Also suitable as an adhesion primer for metals. Aromatic-free, to be used as 1K, but also combinable with hydrophilic isocyanates (2K).
SiliXan W 555-15/AB
| TDS | MSDS |
| |
|
Solid content [%] 15%
pH 8 - 9
Viscosity [mPas] 8 - 10
Application
Hydrophilic inorganic-organic composite as anti-fog coating for polycarbonate (PC).
SiliXan W 554 AB UV
| TDS | MSDS |
| |
|
Solid content [%] 30%
pH 4 - 6
Viscosity [mPas] 10 - 12
Application
UV-curing hydrophilic hybrid coating with anti-fog effect for plastics, especially PMMA. Good resistance to alcohols such as isopropanol: no smudge marks or loss of anti-fog properties.
SiliXan W 425 C+
| TDS | MSDS |
| |
|
Solid content [%] 38%
pH 3.5 - 4.5
Viscosity [mPas] 36 - 40
Application
Improvement of abrasion resistance as well as corrosion, water and chemical resistance of PU, acrylate or epoxy dispersions. Suited for purely physically drying coatings but also for isocyanate or melamine curing coatings.
For metal coatings (aluminium, zinc or stainless steel) as well as for plastic coatings (PC, PC-ABS, PMMA).
SiliXan W 725
| TDS | MSDS |
|
|
Solid content [%] 27%
pH 4.0 - 4.5
Viscosity [mPas] 10 - 11
Application
Improved corrosion, water and chemical resistance of PU, acrylate or epoxy dispersions. Suited for purely physically drying coatings but also for isocyanate or melamine curing coatings.
For metal coatings (aluminium, zinc or stainless steel) as well as for plastic coatings (PC, PC-ABS, PMMA).
Delivery program / company brochure
Our company brochure and an overview on our delivery program is available for download.
 |
Delivery program (PDF for download) |
 |
Company broschure (PDF for download) |
The development team of the SiliXan GmbH has moreover some solutions in stock, which we will gladly send you on request.
We offer the possibility to you as a key customer to adapt existing products to your requirements as well as new to work out raw material solutions together.
Guide formulations
Here formulation guidelines will soon be available for download.
On request we can also send you gladly guide formulations.
General terms of sale and delivery
All our offers, deliveries and services are made according to
our general terms of sale and conditions, which are here as PDF to download for reading.
