TDS	MSDS

Solid [%] 30%

Solvent: Ethanol

Viscosity [mPas] 11 - 150

Application:

1. Additive for solvent-based coatings to increase hydrophobicity or to obtain an easy-to-clean or anti-limescale effect.
2. Concentrate for making glass or other mineral surfaces hydrophobic. The coating shows a slip and an anti-graffiti effect and water rolls off in drops.Anorganisch-organisches Siliciumpolymer

TDS	MSDS

Solid [%] 100%

Solvent: solvent-free

Viskosity [mPas] 500 - 700

Application:

Non-stick, slip and easy-to-clean additive for UV coatings. Linerless labels.

TDB	SDB

Solid [%] 100%

Solvent: solvent-free

Viskosity [mPas] 200 - 400

Application:

Non-stick, slip and easy-to-clean additive for UV coatings. 

TDS	MSDS

Solid content [%] 80%

Solvent: Acrylate

Properties:

Fluorine containing polymer on SiO₂/ZrO₂ base with methacrylic groups; Hydrophobic additive for UV lacquers

TDS	MSDS

Solid content [%] 30%

Solvent: Water

Properties / application:

Fluor polymer with hydro- and oleophobic properties for the formulation of aqueous impregnations and coatings with a low free surface energy (easy-to-clan, non-stick), e.g. for water-based coatings on wood or on mineral substrates like concrete, stone, brick or plaster.

TDS	MSDS

Active agent content [%] / solvent: 10% in 2-Butanol

RT drying: yes

Forced drying: >40°C

Properties:

Starter for SiliXan U, W and T.
For water and solvent based systems, suited as well for sol-gel and silicone resin systems

TDS	MSDS

Active agent content [%] / solvent: 10% in propylene glycol-n-butylat

RT drying: yes

Forced drying: >40°C

Properties:

Starter for SiliXan U and for use as an additive in isocyanate systems (2K-PU).

TDS	MSDS

Active agent content [%] / solvent: without solvent

RT drying: yes

Forced drying:>40°C

Properties:

Starter for SiliXan U and for use as an additive in isocyanate systems (2K-PU), low yellowing.

TDS	MSDS

Active agent content [%] / solvent: without solvent

RT drying: yes

Forced drying:>40°C

Properties:

Starter for SiliXan U and for use as an additive in isocyanate systems (2K-PU), low yellowing.

TDS	MSDS

Active agent content [%] / solvent: 50% in Butanol

RT drying: ++

Forced drying:>40°C

Properties:

Starter for SiliXan U and T, good room temperature drying

TDS	MSDS

Active agent content [%] / solvent: 100% blocked acid

RT drying: ++

Forced drying:>40°C

Properties:

Solvent-free alternative to SiliXan Cat 210

TDS	MSDS

Active agent content [%] / solvent: 25% in 1-Methoxy-2-propanol

RT drying: ++

Forced drying:>40°C

Properties:

Starter for SiliXan U, good room temperature drying

TDB	MSDS

Viscosity [mPas] 3000

Properties / application

Ungesättigtes siliciumfunktionelles Bindemittel zur Formulierung harter, kratzfester Beschichtungen mit guter Haftung auf PC, PMMA und PVC. Cobinder zur Verbesserung der Haftung, Härte und Abriebfestigkeit in UV- härtenden Formulierungen.

Unsaturated silicium functional binder for the formulation of hard, scratch resistant coatings with good adhesion to PC, PMMA and PVC. Cobinder to improve adhesion, hardness and abrasion resistance in UV-curing formulations.

TDS	MSDS

Viscosity [mPas] 540 - 940

Properties / application

Formulation of UV lacquers for mineral surfaces (natural stone or concrete) or use as co-binder for plastic coating

TDS	MSDS

Viscosity [mPas] 1490 - 1790

Properties / application

Silicon functional acrylate for the formulation of UV scratch resistant coatings on plastic (PMMA, PET, PC) and metals, preferred for indoor use. Additive for peroxide cross-linking systems and for UV curing coatings in exterior.

TDS	MSDS

Viscosity [mPas] 980 -1270

Properties / application

Silicon functional polyurethane acrylate for the formulation of UV scratch resistant coatings on plastic (PMMA, PET, PC) and metals, for indoor and outdoor use. Suited for dual cure application.

TDS	MSDS

Viscosity [mPas] 900 - 1300

Properties / application

Like M 610, but higher flexibility due to higher PU content. Suited for dual cure application.

TDS	MSDS

Viscosity [mPas] 900 - 1300

Properties / application

Like M 620, but higher flexibility due to higher PU content. Suited for dual cure application.

Properties / application

Fluorianted hydrophobic additive for UV lacquers - see SiliXan A

Application:

Highly effective slightly acidic rust remover concentrate for  the production of immersion baths or for the manufacture of rust remover sprays or aerosols

Solid content, solvent: 40% in water

Application:

Active agent concentrate for the production of active corrosion protection coatings as spray, dip or aerosol application; based on metallic zinc in inorganic binder matrix; colour: silver

Solid content, solvent: 50% in xylene

Application:

Active anti-corrosion coating for spray or dip application; Based on metallic zinc in an inorganic binder matrix; Colour: black

Solid content, solvent: 50% in xylene

Application:

Active agent concentrate for the production of scale protection coatings; temperature stable up to 950°C; spray, dip or aerosol application; based on metallic aluminium in inorganic binder matrix; colour: silver 

Solid content, solvent: 35% in Petrolether 100/140

Application:

Concentrate of an easy-to-clean polish for glass or cermaic; fluorinated silicium compound

Solid content, solvent: 2,5% in Isopropanol

Application:

Ready-to-use formulation for hydrophobisation of glass or mineral surface. Application by polishing, spraying, or dipping. Fluorine-free product.

Solid content, solvent:  1% in Ethanol

TDS	MSDS

Solid [%] 30%

Solvent: Ethanol

Viscosity [mPas] 11 - 150

Application:

1. Additive for solvent-based coatings to increase hydrophobicity or to obtain an easy-to-clean or anti-limescale effect.
2. Concentrate for making glass or other mineral surfaces hydrophobic. The coating shows a slip and an anti-graffiti effect and water rolls off in drops.Anorganisch-organisches Siliciumpolymer

Application:

Impregnations and coatings for wood and mineral substrates such as concrete, stone, brick or plaster.

Solid content, solvent: 10% in water

Application:

Water based active agent concentrate for the production of active corrosion protection coatings as spray, dip or aerosol application; based on metallic zinc in inorganic binder matrix; colour: silver
Premium product

Solid content, solvent: 10% in water

TDS	MSDS

Solid content [%] 40%

Solvent: Propylene glycol-n-butyl ether

Viscosity [mPas] 20-30

Application:

Temperature-curing silicium-functional binder for formulation of anti-fingerprint coatings on stainless steel or aluminium. Drying temperature 240°C PMT (coil)

TDS	MSDS

Solid content [%] 25%

Solvent: Ethanol

Viscosity [mPas] 5 - 7

Key features and application:

Glass-like, temperature-stable coatings (up to 800°C). No yellowing at high temperatures. Co-binder for solvent-based baking coatings to improve the abrasion, temperature and corrosion resistance. "Easy-to-clean" properties.

TDS	MSDS

Solid content [%] 15%

Solvent: Isopropanol

Viscosity [mPas] 9 - 11

Key features and application:

Glass-like coatings with high abrasion resistance and good corrosion protection on aluminium or stainless steel. It can also be used as a binder and as an additive for solvent-based varnishes or paints.
"Easy-to-Clean" properties due to low surface energy.

TDS	MSDS

Solid content [%] 10%

Solvent: Water, pH 2-3

Viscosity [mPas] 6 - 9

Key features and application:

SiO₂ polymer for the formulation of glass-like, hydrophilic coatings on polymers, metals (stainless steel, aluminium) or on glass and ceramic surfaces.

TDS	MSDS

Solid content [%] 20%

Solvent: water and ethanol, pH 12

Viscosity [mPas] 8-12

Key features and application:

Tarnish protection coating for stainless steel and copper, water-born.

TDS	MSDS

Solid content [%] 40%

Solvent: Isopropanol

Viscosity [mPas] 10-14

Key features and application:

Tarnish protection coating for stainless steel and copper, solvent-born.

TDS	MSDS

Solid content [%] pH 30%

Solvent: water, pH12

Viscosity [mPas] 19-29

Key features and application:

Glass-like and temperature-stable (up to 800°C) clear coat with anti-tarnish effect for stainless steel and steel. Temperature-drying (≥180°C) anticorrosive coatings as well as adhesion primers for steel. Room temperature drying concrete coatings. The binder is suitable for applications on steel, stainless steel, aluminum, glass, concrete or ceramics.

TDS	MSDS

Solvent: solvent-free

Viscosity [mPas] 20 - 30

Key features and application:

Low-yellowing coatings for aluminium, stainless steel and glass. High temperature applications, UV stable.
Humidity drying at 20°C. Forced drying 60 to 250°C. 
Application in the automotive sector (body, rims, engine), in industrial and mechanical engineering as well as exterior application (e.g. facades).

TDS	MSDS

Solvent: solvent-free

Viscosity [mPas] 23-27

Key features and application:

Air-drying weathering and UV-stable, fade-proof varnishes and paints for construction, industrial or commercial applications. The product is characterised by good chemical resistance and high temperature stability. Good adhesion to glass, aluminium, stainless steel and mineral surfaces (concrete, plaster, natural stone). Forced thermal drying possible.

TDS	MSDS

Solvent: solvent-free

Viscosity [mPas] 23 - 27

Key features and application:

Properties like T 600, improved flash point.

TDS	MSDS

Solid content [%] 15%

Solvent: 1-Methoxy-2-propanol

Viscosity [mPas] 16-22

Key features and application:

Formulation of temperature resistant coatings. Co-binder and reaction accelerator in sol-gel and silicone resin systems. Adhesion promoter in coatings for glass, metal or plastic. Inorganic UV absorber in impregnations or coatings. Formulation of optical coatings with increased refractive index. UV protective primer for wood. Mother of pearl effect coating.

TDS	MSDS

Solid content [%] 15%

Solvent: Dipropylene glycol monomethyl ether

Viscosity [mPas] 23 - 27

Key features and application:

UV-protective primer for wood. Additive for solvent or water systems to improve the UV protection and chemical resistance.

TDS	MSDS

Solid content [%] 55 - 59%

Solvent: solvent-free

Viscosity [mPas] 18 - 24

Key features and application:

Inorganic-organic binder based on zirconium oxide that cures with moisture and forms temperature-stable coatings for high-temperature applications up to 600°C, e.g. stoves.

TDS	MSDS

Solid content [%] 12 - 14%

Solvent: Water (pH1)

Viscosity [mPas] 150 - 250

Key features and application:

1. Concentrate for the production of mother-of-pearl effect coatings for glass with good abrasion resistance and hardness. Based on silicon and titanium oxide.
2. Transparent photocatalytic coating for glass, metal, mineral and painted surfaces. The <1µm thin coating protects against dirt, especially in rainy outdoor areas.

Transparent photo-catalytic coatings for glass, metals and mineral surfaces. Titanium oxide polymer, water-born.

TDS	MSDS

Solid content [%] <5%

Solvent: Butyl glycol 

Viscosity [mPas] 

Key features and application:

Transparent photocatalytic coating for plastic, glass, metal and mineral surfaces, solvent based.

TDS	MSDS

Solid content [%] 50%

Solvent: 1-Methoxy-2-propanol

Viscosity [mPas] 61 - 71

Properties / application:

High-quality UV-stable clear coats or pigmented coatings. The product shows good adhesion to metals such as aluminium or stainless steel. An adhesion primer is required for use on plastics made of PC, PC-ABS or PMMA.

TDS	MSDS

Solid content [%] 60 - 65%

Solvent: 1-Methoxy-2-propanol

Viscosity [mPas] 200 - 400

Properties / application:

Formulation of high-quality UV-stable clear coats or pigmented coatings. The product shows good adhesion to metals such as aluminium or stainless steel. The silane content (SiOx) is lower than in SiliXan U 310-50/PM, which means that the coating is less brittle and more flexible, e.g. for application on wood.

TDS	MSDS

Solid content [%] 50%

Solvent: Butyl acetate

Viscosity [mPas] 170 - 370

Properties / application:

Formulation of high-quality clear lacquers and coatings for plastics made of PVC, PC, PC-ABS or PMMA. The product also shows good adhesion to metals such as aluminium or stainless steel.

TDS	MSDS

Properties / application:

OH groups containing silane polymer (EQV-OH= 350) as a co-binder for 2K PU or 2K polyurea coatings to increase scratch and abrasion resistance. Application in clear coats on plastics (PC, PC-ABS, PMMA). Furthermore, the adhesion to glass and metals such as aluminium, steel or stainless steel is improved, too.

Solid content, solvent: 100%, solvent free

Viscosity [mPas] 17 - 25

TDS	MSDS

Properties / application:

OH groups containing silane polymer (EQV-OH= 350) as a co-binder for 2K PU or 2K polyurea coatings to increase scratch and abrasion resistance. Application in clear coats on plastics (PC, PC-ABS, PMMA). Furthermore, the adhesion to glass and metals such as aluminium, steel or stainless steel is also improved. Higher OH content than SiliXan Lab 1139.

Solid content, solvent: 100%, solvent free

Viscosity [mPas] 80 - 120

TDS	MSDS

Solid content, solvent: 100%, solvent free

Viscosity [mPas] 280 - 370

Properties / application:

Hard and steel wool abrasion-resistant clear coats for aluminium, wood or base coats - layer thickness 5 to 20 µm. Additive for sol-gel or silicone resin systems. Room temperature drying or 60-180°C drying. Methoxy functional silane groups.

TDS	MSDS

Solid content [%] 40%

pH 3.5-4.0

Viscosity [mPas] 19 - 24

Epoxy content [mol/kg] 0.9

Application

Good adhering primers and corrosion protection coatings for metals (especially steel). Hard and abrasion resistant clear coats for stainless steel or aluminium. Improvement of blocking resistance. Good adhesion to glass. Binder or additive for acidic or alkaline set (top coat) formulations: improvement of the corrosion and abrasion resistance of aqueous acrylate, epoxy or polyurethane dispersions as well as of sol-gel systems.

TDS	MSDS

Solid content [%] 38%

pH 3 - 4

Viscosity [mPas] 23 - 27

Epoxy content [mol/kg] 0.6

Application

Improvement of abrasion resistance as well as corrosion, water and chemical resistance of PU, acrylate or epoxy dispersions. Suited for purely physically drying coatings but also for isocyanate or melamine curing coatings.
For metal coatings (aluminium, zinc or stainless steel) as well as for plastic coatings (PC, PC-ABS, PMMA).

TDS	MSDS

Solid content [%] 50%

pH 4- 5

Viscosity [mPas] 23 - 39

Epoxy content [mol/kg] 1.8

Application

Good adhering primers and coatings for glass and metals. Cobinder for acidic formulations (sol-gel, acrylate, epoxy- or PU systems/dispersions). Higher content of aliphatic epoxide.

TDS	MSDS

Solid content [%] 40%

pH 4.0 - 4.5

Viscosity [mPas] 12 - 18

Epoxy content [mol/kg] 0.9

Application

Stoving coatings on glass and metals (steel, aluminum). Combination with aqueous acidic acrylate, epoxy or polyurethane dispersions possible.

TDS	MSDS

Material base: inorganic-organic polymer with functional silicium groups

Solid content [%] 33%

pH 4 - 5

Viscosity [mPas] 11 - 22

Application

1. Co-binder for melamine or isocyanate curing waterborn coatings in order
to improve adhesion on glass and metals (aluminium, steel, stainless steel,
zinc) and in order to to increase the scratch and abrasion resistance.
2. Formulation of clear coats with 5 to 20 μm dry film thickness.
Application on primed or base coated plastics or on aluminum and stainless
steel. Suited as an additional scratch-resistant clear coat on 2K PU clear
coats or on baked enamel coating.

TDS	MSDS

Solid content [%] 15%

pH 7.5 - 8.5

Viscosity [mPas] 8 - 10

Application

Hydrophilic inorganic-organic composite for anti-fog coating on glass and hydrophilic coating on metals. Also suitable as an adhesion primer for metals. Aromatic-free, to be used as 1K, but also combinable with hydrophilic isocyanates (2K).

TDS	MSDS

Solid content [%] 15%

pH 8 - 9

Viscosity [mPas] 8 - 10

Application

Hydrophilic inorganic-organic composite as anti-fog coating for polycarbonate (PC).

TDS	MSDS

Solid content [%] 30%

pH 4 - 6

Viscosity [mPas] 10 - 12

Application

UV-curing hydrophilic hybrid coating with anti-fog effect for plastics, especially PMMA. Good resistance to alcohols such as isopropanol: no smudge marks or loss of anti-fog properties.

TDS	MSDS

Solid content [%] 38%

pH 3.5 - 4.5

Viscosity [mPas] 36 - 40 

Application

Improvement of abrasion resistance as well as corrosion, water and chemical resistance of PU, acrylate or epoxy dispersions. Suited for purely physically drying coatings but also for isocyanate or melamine curing coatings.
For metal coatings (aluminium, zinc or stainless steel) as well as for plastic coatings (PC, PC-ABS, PMMA).

TDS	MSDS

Solid content [%] 27%

pH 4.0 - 4.5

Viscosity [mPas] 10 - 11

Application

Improved corrosion, water and chemical resistance of PU, acrylate or epoxy dispersions. Suited for purely physically drying coatings but also for isocyanate or melamine curing coatings.
For metal coatings (aluminium, zinc or stainless steel) as well as for plastic coatings (PC, PC-ABS, PMMA).

TDS	MSDS

Solid content [%] 27%

pH 4 -  5

Viscosity [mPas] 17 - 23

Application

Inorganic-organic polymer with nanoscaled silicon dioxide. Formulation of waterborn corrosion protection coatings based on zinc flakes or zinc dust.